Acer Swift 1 SF114-32 BIOS Update Windows 10 – Acer Swift 1 SF114-32 BIOS is the first thing that is loaded when you start the laptop. It initialize your hardware before booting a Windows OS from your hard drive. Damaged BIOS can prevent the chipset from working properly. If this happens, you must reinstall your BIOS. Here, we offer the Acer Swift 1 SF114-32 BIOS Update by an appropriate installation guide. It is quite simple to download the Acer Swift 1 SF114-32 BIOS Update, just simply click the “Download Link” below.
The Acer notebook has an illuminated chiclet keyboard. The flat keys have a short cube and a clear pressure point. When writing, the keyboard has a slight deformation that is stronger in the center than in the edges. But that did not turn out to be a nuisance. In general, Acer provides a correct keyboard here, which is also sufficient for regular writing tasks. Keypad lighting is controlled by a function key and there is only one brightness level. The multi-touch compatible Clickpad covers an area of approximately 10.6 x 7.8 cm (~ 4.2 x 3.1 inches). This provides enough space to use gesture control. The smooth surface of the pad facilitates the sliding of the fingers. The cushion also has a short bucket and a clear pressure point.
The 14-inch matte screen of the Acer Swift 1 has a native resolution of 1920×1080 pixels. Although the screen offers exceptional contrast (1923: 1), the maximum brightness (239.8 cd / m²) is too low. A positive point for the screen is that it does not show PWM flicker. At the time of delivery, the color difference of the Delta E-2000 screen is 5.54, the target value is less than 3. The screen does not suffer from a blue tint. Acer has equipped the Swift 1 with a screen with stable viewing angles, which allows you to see the screen from any position. You can use the laptop outdoors if the sun is not too bright. With the Swift 1 SF114-32, Acer offers a sleek and compact 14-inch notebook designed for desktop and Internet applications. Our test unit can be purchased for around 600 euros (~ $ 707), and there are also alternative equipment and color options. The Swift 1 features a Pentium Silver N5000 quad-core processor. This is a representative of the Intel Gemini Lake platform. The processor runs at a basic clock speed of 1.1 GHz, which can be increased through Turbo up to 2.6 GHz (four cores) or 2.7 GHz (single core). A low TDP of 6 watts allows the passive cooling of the SoC. The Pentium runs our processor tests with frequencies ranging from 2.3 to 2.6 GHz (single thread) and 2 GHz (multi thread) both in the network and in the battery. We test if the Turbo can also be maintained for longer by running the Cinebench R15 multi-threaded test for approximately 30 minutes in a constant cycle. The results fall slightly from the first to the second pass and then remain at the same level. Therefore, the turbo is constantly running at around 2 GHz. In our processor tests, the Pentium N5000 gets between 10 and 40% better results than its predecessor, the Pentium N4200. With that, the N5000 is approaching the Core-i3 processors of the Broadwell generation. But this is not the end. With active cooling, the processor must be able to run constantly at full speed and generate higher test results. An active dual-channel mode would also provide a bit more performance. The increase in performance is due to changes and improvements made by Intel. The architecture of the Pentium N4200 predecessor (Goldmont, Apollo Lake platform) has been developed and is now called Goldmont Plus. In addition, the level 2 cache has doubled from 2 to 4 MB.
Acer Swift 1 SF114-32 Windows 10 BIOS Update
Here, we offer Direct Download Link for Acer Swift 1 SF114-32 BIOS Update Windows 10 64-bit. The BIOS is original, not repacked or modified by us anyway. Just simply click the “Download Link” below.
How to install the BIOS update using a USB flash drive:
- Create a bootable USB flash drive.
- Download the Acer Swift 1 SF114-32 BIOS Update file and save it to the USB flash drive. For example, 3310.fd
- Right-click this file and select Rename. Enter zg5ia32.fd as new filename.
- Copy thezg5ia32.fd and Flashit.exe files to the USB flash drive.
- Turn off the Acer Swift 1 SF114-32 and plug in your AC adapter..
- Connect the USB flash drive and restart the Acer Swift 1 SF114-32.
- Press and hold down the Fn and the ESC keys together and press the power button.
- When the power light lits, release the Fn and ESC keys. The power light will start to blink.
- Let the system run. After approximately 1 to 7 minutes, the system will restart and the BIOS will be updated.
Acer Swift 1 SF114-32 BIOS Windows 10 Update
Acer Swift 1 SF114-32 System BIOS, Download